PTAC + Electric Heat Models
Everyday Price
$1,329.00
Sale Price
$1,129.00
Total Savings
$200.00
Extended Service Contracts
Color
Features
- Electric Heat
- Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability.
- Additional heating element bottom plate above an improved heat shield provides extra thermal protection.
- Additional thermistor on the blower scroll outlet regulates internal temperature.
- Factory run-tested units reduce problems in the field.
- Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics.
- Easy access filters simplify maintenance and extend the life of the product.
- Room freeze protection initiates heat if temperature falls to 40?F in an unoccupied room.
- Random compressor restart protects electrical systems from overload when power is restored.
- Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation.
- Break-proof control door design maintains the integrity of the unit.
- Indoor coil frost sensor protects the compressor to lengthen the life of the unit.
- Diamonblue Technology protects the outdoor coil from harsh environments..Industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty.
- Nationwide service network and U.S. based Friedrich expert technical team ensures you get fast, knowledgeable service..Super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6.
- Exceptional FriedrichLink energy management thermostats available (wired & wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability.
- Advanced coil design adds more surface area leading to higher efficiencies.
- Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss.
- Energy efficient heat pump models available in our complete line.
- Electronic defrost control ensures more run time in efficient heat pump mode.
- Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage.
- Slinger ring technology in condensate removal system cools the coil and increases efficiency.
- Desk control ready to allow hotel owners to control units from a central location..Dehumidification removes up to 3.2 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth.
- Constant Fan mode provides continuous fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off.
- Fresh air damper brings in fresh outside air when desired.
- Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner.
- Anti-microbial air filters are easy to access and washable.
- Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort.
- Even-heat monitoring checks room temperature and automatically adds heat boost if necessary.
- Automatic periodic sampling of room temperature to ensure desired conditions are maintained.
- Reversible indoor air louvers to easily change direction of airflow..Modular product design ensures easy access to key components for cleaning and repairs; including washable, lift-out air filters.
- Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat.
- Standard heat output power cord comes attached to the unit.
- Compact front is designed to preserve indoor floor space with a depth of 7? inches.
- Faultless Sure-hold front cover system securely attaches the front each time.
- Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall.
- Unit may be installed flush with the floor.
Product Description
Our most efficient and reliable PTAC yet.Engineered for quieter performance, the Friedrich PTAC features a tangential blower wheel, universal heater options, and modular component design for easier service. Hotels focused on maximizing room revenues and minimizing guest complaints buy Friedrich PTAC: Curved coil design of the SG series maximizes the internal surface area to deliver higher efficienciesStainless steel endplates on the coils for better corrosion resistanceGalvanized, zinc-coated steel wall sleevesTangential fan provides quiet, yet powerful airflow that quickly reaches all corners of the roomTwo motor design for quieter indoor sound levelsThick insulation on the inner walls reduce sound transfer into the roomConstant Fan mode produces a steady stream of white noise in both cooling and heating modesIndustry-leading 2-year parts and labor and 5-year limited warranty.
Specification
Additional Performance Specs | |
Front Cover Height | 16 |
Front Cover Width | 42 |
Front Cover Depth | 7 3/4 |
Cut-Out Height | 16 1/4 |
Cut-Out Width | 42 1/4 |
Dimensions With Package | 21 1/2 |
Net Weight | 118 lbs |
Shipping Weight | 138 lbs |
Air Circulation | 300 CFM |
COP | n/a |
Moisture Removal | 2.7 pints per hour |
Indoor CFM High | 400 |
Indoor CFM Low | n/a |
Sensible Heat Ratio | 0.75 |
Vent CFM | 75 |
R-410A Charge | 36 oz |
Suggested Retail Price | Please contact the Friedrich Contract Sales Department at (800) 541-6645 |
Cooling Btu/hr | |
Cooling Btu/hr | 11800 |
Detailed Electrical Information | |
Voltage | 265 |
Volt Range | 292-239 |
Cooling Amps | 4.2 |
Cooling Watts | 1015 |
Reverse Heating Amps | 18.87 |
Detailed Electrical Information | 13.02 |
Detailed Electrical Information | 9.25 |
Reverse Heating Watts | 5000/3450/2450 |
Compressor LRA | 19 |
Compressor RLA | 3.9 |
Outdoor Fan Motor | HP |
Plug Face (NEMA #) | |
Power Cord Length | 18 |
EER | |
EER | 11.6 |
Reverse Heating Btu/hr | |
Reverse Heating Btu/hr | n/a |
Unit Dimensions | |
Height | 16 |
Width | 42 |
Depth | 13 3/4 |
Volts Rated | |
Volts Rated | 265V |
Documentation
From the Manufacturer
Delivery
Delivery Policy
Standard Local Appliance Delivery Includes:
- Level and test of the appliance to ensure its connected properly.
- Connection of appliance to EXISTING water connection, drain or external dryer exhaust for washers, dryers, ranges, refrigerators, and freezers, provided the customer also purchases new connections from Craigville Appliance (dryer vent, range, or dryer cord)
- Inspection of appliance for visible damage
- Basic product demonstration and testing of appliance to ensure proper connection.
Haul-away of old appliances:
- $25 recycle fee per appliance being hauled away is included in the delivery price on a one for one basis.
- Relocation of an old appliance within the same residence fee is $79 (except for placing in attached garage, reconnection not included)
Standard Local Appliance Delivery Does NOT Include:
- Appliances not purchased at Craigville Appliance
- Installation of dishwashers, over-the-range microwaves, drop-in ranges, wall ovens, surface units, cooktops, gas dryers, air conditioners, or built-in refrigerators; installation available for additional fees; see a store associate for details.
- Connection through floors or old duct work
- Removal, haul away or recycling arrangement of old appliance
- Shut off of main water valve; delivery teams can’t connect appliances unless there's a working shut-off valve on the same floor.
Refrigerators
New water line/ice maker connector is required (sold separately).
Dishwashers
Dishwasher installation sold separately and requires appointment. New dishwasher connector hose is required (sold separately).
Electric Ranges
Electrical cord and new three- or four-prong plug are required (sold separately).
Electric Dryers
Electrical cord and dryer duct are required (sold separately).
Gas Ranges
Gas hookup with gas installation kit required (sold separately)
Gas Dryers
Gas hookup with gas installation kit required (sold separately). New dryer duct is required (sold separately).
Washers
New hoses required for connection (sold separately).
Professional Installation With Delivery
For your convenience, we provide installation services for an additional fee. Dishwashers, microwaves, cooktops, wall ovens, slide-in ranges, drop-in ranges, gas ranges, gas dryers, range hoods, garbage disposals and trash compactors can be installed by one of our authorized installers.
Disclosures

Features
- Electric Heat
- Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability.
- Additional heating element bottom plate above an improved heat shield provides extra thermal protection.
- Additional thermistor on the blower scroll outlet regulates internal temperature.
- Factory run-tested units reduce problems in the field.
- Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics.
- Easy access filters simplify maintenance and extend the life of the product.
- Room freeze protection initiates heat if temperature falls to 40?F in an unoccupied room.
- Random compressor restart protects electrical systems from overload when power is restored.
- Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation.
- Break-proof control door design maintains the integrity of the unit.
- Indoor coil frost sensor protects the compressor to lengthen the life of the unit.
- Diamonblue Technology protects the outdoor coil from harsh environments..Industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty.
- Nationwide service network and U.S. based Friedrich expert technical team ensures you get fast, knowledgeable service..Super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6.
- Exceptional FriedrichLink energy management thermostats available (wired & wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability.
- Advanced coil design adds more surface area leading to higher efficiencies.
- Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss.
- Energy efficient heat pump models available in our complete line.
- Electronic defrost control ensures more run time in efficient heat pump mode.
- Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage.
- Slinger ring technology in condensate removal system cools the coil and increases efficiency.
- Desk control ready to allow hotel owners to control units from a central location..Dehumidification removes up to 3.2 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth.
- Constant Fan mode provides continuous fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off.
- Fresh air damper brings in fresh outside air when desired.
- Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner.
- Anti-microbial air filters are easy to access and washable.
- Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort.
- Even-heat monitoring checks room temperature and automatically adds heat boost if necessary.
- Automatic periodic sampling of room temperature to ensure desired conditions are maintained.
- Reversible indoor air louvers to easily change direction of airflow..Modular product design ensures easy access to key components for cleaning and repairs; including washable, lift-out air filters.
- Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat.
- Standard heat output power cord comes attached to the unit.
- Compact front is designed to preserve indoor floor space with a depth of 7? inches.
- Faultless Sure-hold front cover system securely attaches the front each time.
- Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall.
- Unit may be installed flush with the floor.